Parquet & Timber Flooring in Petaling Jaya

Common questions about parquet & timber flooring

How much does parquet or timber flooring cost in Petaling Jaya?

Sanding and re-polishing existing parquet typically runs lower than a full replacement, since you're paying mainly for labour and finish rather than new timber. New engineered timber installation costs more than laminate but less than solid hardwood strip flooring, and prices vary a lot depending on the wood species, room size, and how much subfloor prep is needed. Always get an itemised quote rather than a flat per-square-foot figure, since sanding old parquet with uneven boards or lifted blocks often costs more than a clean installation.

How often does timber flooring need to be re-sanded or refinished?

Most solid timber and parquet floors in Petaling Jaya homes need re-sanding and re-coating every 7 to 10 years under normal foot traffic, sooner in high-traffic areas like living rooms or if the floor sees direct sun exposure that dulls the finish. Engineered timber can usually be sanded fewer times over its life since the top veneer layer is thinner.

What should I expect during a timber flooring installation or restoration?

Expect an initial site visit to check subfloor condition and moisture levels, followed by removal of old flooring if needed, subfloor levelling, laying or sanding, then several coats of sealant or varnish with drying time in between. A full room restoration can take anywhere from a few days to over a week depending on drying conditions, and the space usually can't be used normally until the final coat cures.

How can I judge if a flooring contractor did good quality work?

Check that the finish is even with no visible sanding marks or swirl patterns, that seams between planks or blocks are tight and consistent, and that the floor feels solid underfoot with no hollow spots or movement. Ask how many coats of finish were applied and what product was used, since cheaper single-coat jobs wear out and show scratches much faster.